|
RESUS Description
RESUS Components
Electrical Installation
RESUS Performance
|
 |
 |
|
RESUS - System Performance
Example: Kilo Class submarine ascent parameters after initiation of gas generators.
After initiation of the gas generators, the RESUS system blows the forward main ballast tanks and ejects water in
a very short time. Each generator produces gas at
a constant rate for about 13 seconds. During the start phase, Automatic
step-by-step initiation of individual gas
generators prevents overloading the main ballast tanks. System performance has
been successfully tested and demonstrated on board a number of different
submarines.
The figure below shows the ascent parameters of a submarine surfacing after an emergency activation of RESUS. This example is based on a Kilo Class submarine with a leakage at diving depth pressure in the forward compartment.
Ascent speed, Trim Angle and Submerged Depth - versus - Time
Contact for Further Information
|
|
If
you require more detailed information on RESUS, or any of our products or services,
then please contact
us, indicating your particular areas of interest or intended application.
Your enquiry will receive our best attention.
|
|
